Prepare NACE-CIP1-001 Question Answers - NACE-CIP1-001 Exam Dumps
Real NACE NACE-CIP1-001 Exam Questions [Updated 2026]
NEW QUESTION # 12
Digital hygrometers
- A. consist of a bimetallic sensing element protected from wind gusts.
- B. determine relative humidity, air temperature, and dew point temperature:
- C. use a thermocouple in contact with the surface to measure temperature
- D. are used to measure temperature from a distance.
Answer: B
NEW QUESTION # 13
Which one of these elements is not necessary for corrosion to occur:
- A. Cathode
- B. Electrolyte
- C. Anode
- D. Reference Cell
Answer: D
NEW QUESTION # 14
Galvanic corrosion occurs on which of the following substrates:
- A. Fiberglass Reinforced Plastic
- B. Concrete
- C. Wood
- D. Metal
Answer: D
NEW QUESTION # 15
Due to a previous premature coating failure the owner has required the original coating applicator to return to remove and replace 10,000 square feet of a failed three coat system at the applicator's cost. Due to the financial implications of another failure, the owner has offered you the job as the NACE CIP Level 1 Coating Inspector and explained that he expects you to be his "insurance policy" for this job. You have never been involved in a warranty job before and are unfamiliar with the coating system.
Your preferred FIRST course of action is to:
- A. Meet with the owner and explain your limitations and concerns prior accepting the assignment
- B. Review the Product Data Sheets, and conduct a walk thru of the job site prior to the pre-job Conference
- C. Purchase Professional Liability Insurance prior to job commencement
- D. Review the Product Data Sheets and meet with the Coating Applicator 'prior to the pre-job meeting
Answer: B
NEW QUESTION # 16
Upon arrival of coating materials, the inspector should
- A. observe aryl document that the applicator WFT at regular intervals during application.
- B. observe and document time frame and environmental conditions between each coat.
- C. observe and document the amount of material and batch numbers.
- D. review coating contractors' plans for storage of coating materials and confirm they meet national, local and owners' fire and environmental regulations.
Answer: C
NEW QUESTION # 17
You are asked to be the only coating inspector on a small bridge recoating job where existing coating contains lead. The owners' representative has supplied you with the local code governing the removal and disposal of lead based coatings, however upon reading the document you having great deal of difficulty understanding the technical language.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Minimize your lack of understanding and go ahead with the inspection task to the best of your ability
- B. Hire a third patty to assist you in understanding the document
- C. Advise the owners' representative of your lack of knowledge in this area
- D. Carefully review the document and do the best you can
Answer: D
NEW QUESTION # 18
An Inspector should change position when:
- A. The Inspectors position is not the majority position
- B. The Owner can save some money by the change
- C. The Inspector is convinced by verifiable facts
- D. Only when directed by the supervisor
Answer: C
NEW QUESTION # 19
Which of these tests uses a syringe?
- A. Bresle patch
- B. Soluble salts meter
- C. Potassium ferricyanide
- D. Sleeve test
Answer: A
NEW QUESTION # 20
The least effective method of surface cleaning is most likely
- A. power tool cleaning.
- B. water blasting.
- C. hand tool cleaning.
- D. dry grit blasting.
Answer: C
NEW QUESTION # 21
To be of value the Inspector's documentation must be:
- A. Always handwritten
- B. Always typewritten
- C. Timely, accurate and concise
- D. Submitted before the end of the job
Answer: C
NEW QUESTION # 22
The NACE Inspector should perform tests for soluble salts:
- A. Prior to surface preparation
- B. When specified
- C. After surface preparation
- D. Prior to coating application
Answer: B
NEW QUESTION # 23
When the joint NACE/SSPC abrasive blast cleaning standards are specified, the pictures in SSPC VIS 1 can be used as:
- A. A general guide
- B. A method to grade surface profile
- C. A final conflict resolution method
- D. Pass/fail criteria
Answer: A
NEW QUESTION # 24
Corrosion generally occurs at which of the following sites:
- A. Metallic pathway
- B. Cathode
- C. Electrolyte
- D. Anode
Answer: D
NEW QUESTION # 25
ISO ST 3 is described as:
- A. Very Thorough hand or power tool cleaning
- B. Thorough hand tool cleaning
- C. Thorough blast cleaning
- D. Very Thorough power tool cleaning
Answer: A
NEW QUESTION # 26
Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include:
Select All That Apply
- A. Failing to determine the base metal reading (BMR)
- B. Rotating the dial too fast when taking measurements
- C. Taking measurements too far from the edge of a surface
- D. Measuring ditty, tacky, or soft films
Answer: A,B,D
NEW QUESTION # 27
According to SSPC PA 2 a Spot Measurement is:
- A. The overall average of all readings
- B. The average of gauge readings taken in a 4cm (1.5 inch) circle
- C. The average of all spot measurements in a given area
- D. A single gauge reading
Answer: B
NEW QUESTION # 28
Dew point is the temperature at which
- A. the air is saturated.
- B. condensation occurs.
- C. water freezes.
- D. humidity decreases
Answer: B
NEW QUESTION # 29
You have just received your NACE CIP Level 1 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Accept the assignment without hesitation
- B. Meet with the prospective employer to determine the scope of your role
- C. Advise the prospective employer that you cannot accept the position
- D. Review the NACE Attestation prior to making a decision
Answer: B
NEW QUESTION # 30
The initial steel condition is important to the NACE Inspector because:
- A. Less abrasive is need if the mill Scale s gone
- B. It affects the final appearance after blasting
- C. If the steel is pitted more coating will be required
- D. The Inspector may have to reject the Steel
Answer: D
NEW QUESTION # 31
A successful coating inspector must be able to
- A. apply the coating with expert accuracy.
- B. recommend the appropriate coating technique for the job to the contractor.
- C. advise the coating applicator on how to mix the coating.
- D. look for problems or issues during application.
Answer: D
NEW QUESTION # 32
......
NACE-CIP1-001 Exam Dumps Pass with Updated 2026: https://actualtests.testinsides.top/NACE-CIP1-001-dumps-review.html