Nov-2022 Realistic HPE6-A71 Accurate & Verified Answers As Experienced in the Actual Test!
Latest HP HPE6-A71 Practice Test Questions, Aruba Certified Mobility Professional Exam Exam Dumps
NEW QUESTION 83
Refer to the exhibit.
An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit.
-Zone A has six controllers that form a cluster.
-Zone B has three controllers that from a cluster.
-Zones C, D, and E have a single standalone controller each.
A total of 13 VAPs are created across the five zones. A zone needs to accept RAP connections form branch offices. All zones have the same AP Group name. One of the zones will not accept connections from the MultiZone APs.
Which could be a cause of this problem?
- A. RAPs are used in the configuration.
- B. The number of VAPs exceeds the maximum limit of 12 VAPs.
- C. AP Group names are different for each zone.
- D. The number of zones exceeds the maximum limit of four zones.
Answer: A
NEW QUESTION 84
An administrator has a cluster of Aruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers.
Before rebooting, which command should the administrator use to move the APs?
- A. active-ap-rebalance
- B. lc-cluster move ap
- C. apmove
- D. active-ap-lb
Answer: C
NEW QUESTION 85
What is true about the operation of the Aruba Mobility Controller (MC) shown below?
- A. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
- B. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- C. The Mobility Master is in disaster recovery mode and will push changes to a Managed Controller.
- D. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
Answer: D
NEW QUESTION 86
Refer to the exhibit.
A user uses Microsoft Windows for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user's wireless session?
- A. The user is configured for PEAP, but the WLAN profile on the controller implemented EAP-TLS.
- B. The user misconfigured the Managed Network Settings profile in Windows.
- C. The AP has reached the limit for number of users that are allowed to connect to the radio.
- D. The controller cannot reach the AAA server to perform the authentication.
Answer: B
NEW QUESTION 87
Refer to the exhibit.
An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to add the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.
What should the administrator implement to allow the RAP to connect to the MC at the Secondary DMZ site while the outage at the primary site persists?
- A. Static configuration from apboot mode
- B. Dynamic discovery through multicast ADP
- C. Dynamic discovery through DHCP Option 60
- D. Dynamic discovery through DHCP Option 43
Answer: A
NEW QUESTION 88
An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a noncluster deployment. The administrator performs these tasks on the MM for the MCs:
* Enables L3 IP mobility for the respective VAPs on the MCs
* Creates a L3 domain and places the MCs in the domain
However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain.
What must the administrator do to fix this problem?
D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Configure the same VLANs on the Mobility Controllers in the L3 domain.
- B. Re-provision the APs associated with the Mobility Controllers.
- C. Enable L3 IP Mobility globally on the Mobility Controllers.
- D. Create a home-agent-to-foreign-agent mapping table.
Answer: D
NEW QUESTION 89
Refer to the exhibit.
An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under theConfiguration section on the Mobility master (MM) shown in the exhibit, where should the administrator configure the split-tunnel mode so that it can be deployed to the RAPs?
- A. WLAN
- B. Roles & Policies
- C. Access Points
- D. Services
Answer: C
NEW QUESTION 90
The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a stand-alone controller.
- B. The AP is configured as a RAP to terminate on a Mobility Master.
- C. The AP is configured to terminate on a Mobility Controller in a cluster.
- D. The AP is configured to terminate on a non-cluster Mobility Controller.
Answer: D
NEW QUESTION 91
Refer to the exhibit.
Once connected to a WLAN, a user cannot reliably access resources in a company's network. Based on the output shown in the exhibit, what can be determined about the user's connection?
- A. The user is connected to an ArubaOS-Switch.
- B. The user is connected wirelessly to a controller.
- C. The user has successfully authenticated through use of PEAP.
- D. The user is connected to a controller through use of the VIA client.
Answer: A
NEW QUESTION 92
An administrator uses a ClearPass server to perform user authentication and download the role configuration that should be applied to the user's session. The server is associated to an AAA profile of a VAP. However, when a user connects to the SSID of the VAP, they are assigned the default role.
What must the administrator do to ensure that the role is downloaded and used?
- A. Enableserver derivation in the ClearPass' RADIUS configuration.
- B. Enable download role for CPPM in the VAP's WLAN profile.
- C. Enable server derivation in the AAA Server Group.
- D. Enable server derivation in the server group.
Answer: A
NEW QUESTION 93
An administrator wants to add a new folder in AirWave. Where would the administrator perform this action?
- A. in Device Setup
- B. in AP/Devices
- C. in Groups
- D. in AMP Setup
Answer: B
NEW QUESTION 94
Refer to the exhibit.
An administrator implements AP licensing on a Mobility Master (MM).
Network engineers at CampusA want to deploy an additional 100 APs.Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses in CampusC are allocated.
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool.
* There arethree dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
What can the administrator do to add capacity for CampusA in alignment with campus policies?
- A. Move 100 licenses from the CampusC pool to the global pool.
- B. Allow CampusA to share from the CampusC pool.
- C. Add 100more AP licenses and assign them to the CampusA pool.
- D. Add 100 more AP licenses to the global pool.
Answer: C
NEW QUESTION 95
An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should the administrator assign to an administrator who should have the same privileges as the default admin account?
- A. superuser
- B. admin
- C. root
- D. level-15
Answer: C
NEW QUESTION 96
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS-Switch configured for per-port tunneled node.
- B. This is an ArubaOS controller configured for per-user tunneled node.
- C. This is an ArubaOS-Switch configured for per-user tunneled node.
- D. This is an ArubaOS controller configured for per-user tunneled node.
Answer: A
NEW QUESTION 97
Refer to the exhibit.
The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a stand-alone controller.
- B. The AP is configured to terminate on a Mobility Controller in a cluster.
- C. The AP is configured as a RAP to terminate on a Mobility Master.
- D. The AP is configured to terminate on a non-cluster Mobility Controller.
Answer: C
NEW QUESTION 98
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown below?
- A. This is an L3-connected cluster.
- B. AP load balancing is enabled.
- C. User load balancing is enabled.
- D. This is an L2-connected cluster.
Answer: B
NEW QUESTION 99
An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?
- A. AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)
- B. AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)
- C. AP names, AP groups, controller names, and controller groups
- D. Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)
Answer: B
NEW QUESTION 100
An administrator wants to change the default roles for the pre- and post-authentication user roles for a WLAN on a Mobility Master (MM). The controllers in the network perform all authentication.
Under the Managed Network hierarchy, where can the administrator assign these roles?
- A. AAA Profiles
- B. AAA Server Group
- C. RADIUS attributes
- D. VLAN
Answer: A
Explanation:
Explanation
References:
In the WebUI1. Navigate to the Configuration AAA Profiles page.2.
Select the default profile or a user-defined AAA profile.3. Click the Initial Role drop-down list, and select the desired user role for unauthenticated users.4. Click the 802.1x Authentication Default Role drop-down list and select the desired user role for users who have completed 802.1x authentication.5.
Click the MAC Authentication Default Role drop-down list and select the desired user role for clients who have completed MAC authentication.
NEW QUESTION 101
An administrator makes a configuration change on a Mobility Master (MM) that causes a Managed Controller to lose connectivity with the MM. The MC attempts auto roll-back, but this fails.
How should the administrator recover from this problem?
- A. Reboot the MC to force auto-roll back to occur.
- B. Access the CLI of the MC and identify the previous configuration file the MC should use.
- C. Access the CLI of the MC, execute the disaster-recovery command, and undo the changes.
- D. Access the CLI of the MC and execute the no command to revert thechanges.
Answer: C
NEW QUESTION 102
An administrator manages an Aruba wireless network. Users authenticate to the wireless network using PEAP,where their credentials are validated by the controller's local database. The company purchases Android tablets to use with an inventory tracking system. The administrator notices that many of the users of these devices use their normal username and password to authenticate, which allows the tablet to access all resources that the user can access from their wireless computers. This is a security violation.
Which Aruba Mobility Controller (MC) feature should the administrator configure to restrict tablet access to a web portal for authentication, where an appropriate post-authentication policy can be applied to these tablets?
- A. AP fingerprinting
- B. AirMatch
- C. Server-derived roles
- D. User-derived rules
Answer: C
NEW QUESTION 103
Refer to the exhibit.
What is true about the operation ofthe Aruba Mobility Controller (MC) shown in the exhibit?
- A. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
- B. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- C. The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.
- D. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
Answer: D
NEW QUESTION 104
An administrator wants to temporarily deny login access who fail 802.1xauthentication functions three or more times. Which process will the administrator need to configure?
- A. blacklisting
- B. captive portal
- C. EAP termination
- D. fail through
Answer: C
NEW QUESTION 105
......
Free HPE6-A71 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://actualtests.testinsides.top/HPE6-A71-dumps-review.html